Websites and locations

A unique range of permanent antistatic additives

Immediate & Permanent Antistatic Properties

Certain Pebax® polymer grades offer a spectrum of antistatic and static-dissipative properties. 

Unlike many other antistatic technologies, Pebax® antistatic polymers are permanent and non-migratory.

They form an immediate, continuous non-migratory 3D network within the host polymer structure. The result is an antistatic blend that is colorable (unlike carbon black solutions) and is largely independent of relative ambient humidity conditions.

Large choice of Pebax® antistatic additives

  • Pebax® MV series based on PA12
  • Pebax® MH series based upon PA6
  • Biobased Pebax® Rnew® 30R51 SA 01 based upon PA11

Food contact and medical agreements are available for specific grades. Please contact and Arkema representative for further information.

Explore our Materials Database for technical information

 

Permanent antistatic additives selection by polymer matrix

Matrix with Low melting point (<180°C):

PE, PP, PMMA, POM, PC/ABS, PVC

Antistatic behavior:

Static dissipative behavior:

Pebax® MV1074 
  • Surface resistivity: 3.109 Ω/sq
  • Melting point: 158°C
  • Refractive index: 1.502
  • Density: 1.07
 Pebax® MV2080
  • Surface resistivity: 107 Ω/sq
  • Melting point: 160°C
  • Refractive index: 1.502
  • Density: 1.07

 

 Pebax® 30R51
  • Surface resistivity: 1.109 Ω/sq
  • Melting point: 150°C
  • Refractive index: 1.490
  • Density: 1.10
  • Bio-based

Transparent in PMMA.

 

 

Matrix with High melting point (>180°C):

PA6, ABS, PBT, PET, PS, HIPS, PC/ABS

Antistatic behavior:

Static dissipative behavior:
Pebax® MH1657
  • Surface resistivity: 1.109 Ω/sq
  • Melting point: 204°C
  • Refractive index: 1.508
  • Density: 1.14
Pebax® MH2030
  • Surface resistivity: 107 Ω/sq
  • Melting point: 200°C
  • Refractive index: 1.508
  • Density: 1.14

Careful Control of Block Copolymer Chemistry...

For many years, Arkema has been famous for their Polyether Block Amide (PEBA) chemistry. By carefully controlling the nature of the polyether blocks (that give flexibility and tailored chemical channeling abilities) and the polyamide blocks (that give toughness and chemical resistance), Arkema offers a wide range of polymers with specific and tailored antistatic properties.

Not all Pebax® grades are antistatic in nature; only those grades whose polyether blocks are specifically chosen for their inherent ability to form continuous molecular charge diffusion channels through the matrix.

...At the Right Concentration

Even at low concentrations of Pebax® antistatic additives in the host resin, a fairly high level of static dissipation is observed.

This level increases as more additive is incorporated (compounded) until a steady-state saturation is achieved. At this critical concentration, a full and complete continuous static-dissipating molecular network has been achieved. 

Morphology obtained with increasing content of Pebax® antistatic additive in a PE matrix:

Morphologies of the matrix/pebax antistatic additive blend according to the amount of additives (from 10 to 35%). The pictures show that the Pebax permanent antistatic additives form a 3D continuous network within the matrix, providing the durable antistatic performance

A Wide Array of Processing Options...

  • Injection

  • Extrusion
  • Cast Film, Blown Film
  • Blow Molding

...For a Wide Array of Applications

  • Storage containers
  • Copy machines
  • Clean room anti-dust surfaces
  • Medical devices
  • Electronics packaging
  • Electronics components
  • Fibers & films
  • Spray tips, nozzles
  • Automotive interior surfaces
  • Industrial Packaging, IBC packaging
  • Food Packaging
  • Consumer goods
  • Cosmetic packaging
Plot of the antistatic performance of two Pebax antistatic additives versus the amount of additive used. It shows both antistatic and static dissipative behaviors can be achieved with different Pebax grades
Anti-static performances depend on both processing conditions and matrix characteristics 
Top